HP 800 Series Manuale di installazione - Pagina 15

Sfoglia online o scarica il pdf Manuale di installazione per Desktop HP 800 Series. HP 800 Series 34. Version a.01.08
Anche per HP 800 Series: Nota di rilascio (19 pagine)

Stampa la pagina

2. If your new hard drive is from a different manufacturer than the old one, it may

have screws in different positions. Determine which mounting holes you need;

then, if necessary, push out rubber screw-hole covers from the inside using a

bent paper clip. (From the outside of the computer, insert the rubber covers

into the holes you won't need.)

If your new hard drive has screws in different positions from the old one, you

will also need to adjust the insulator sheet. Compare the location of the screw-

holes in the new hard drive with those in the insulator sheet. If there is no screw

at position A, then unfold the flap at position A, and lay it flat before laying the

hard drive down on the insulator.

3. Grasp the right flap and pull to the left to engage the connection between the

hard drive and the computer. Then fold the protective sheet back over the hard

drive.

Using OmniBook Disk Drives

Replacing a Hard Drive

Connectors align here.

1-15