HP 8100 - Elite Convertible Minitower PC Manuale di configurazione rapida e di avvio - Pagina 19

Sfoglia online o scarica il pdf Manuale di configurazione rapida e di avvio per Desktop HP 8100 - Elite Convertible Minitower PC. HP 8100 - Elite Convertible Minitower PC 21. Hp compaq convertible minitower business pc
Anche per HP 8100 - Elite Convertible Minitower PC: Specifiche tecniche (2 pagine), Elenco di supporto (34 pagine), Manuale di configurazione del software (9 pagine), Manuale di installazione e configurazione (48 pagine), Mappa illustrata dei ricambi e dell'assistenza (4 pagine)

Stampa la pagina

HP 8100 - Elite Convertible Minitower PC Manuale di configurazione rapida e di avvio

●

Check all cable connections for loose connections or incorrect

connections.

●

Wake the computer by pressing any key on the keyboard or pressing

the power button. If the system remains in suspend mode, shut down

the computer by pressing and holding the power button for at least four

seconds. Then press the power button again to restart the computer.

If the system will not shut down, unplug the power cord, wait a few

seconds, then plug it in again. The computer will restart if automatic

start on power loss is set in Computer Setup. If it does not restart, press

the power button to start the computer.

●

Reconfigure your computer after installing a non–plug and play

expansion board or other option.

●

Be sure that all the needed device drivers have been installed. For

example, if you are using a printer, you need a driver for that model

printer.

●

Remove all bootable media (diskette, CD, or USB device) from the

system before turning it on.

●

If you have installed an operating system other than the factory-

installed operating system, check to be sure that it is supported on the

system.

●

If the system has multiple video sources (embedded, PCI, or PCI-

Express adapters) installed (embedded video on some models only)

and a single monitor, the monitor must be plugged into the monitor

connector on the source selected as the primary VGA adapter. During

boot, the other monitor connectors are disabled and if the monitor is

connected into these ports, the monitor will not function. You can select

which source will be the default VGA source in Computer Setup.

CAUTION:

is always voltage applied to the system board. You must disconnect the

power cord from the power source before opening the computer to prevent

system board or component damage.

Basic Troubleshooting

You can find troubleshooting information in the comprehensive

Maintenance and Service Guide (English only) available under the

reference library at http://www.hp.com/support. Select your country and

language, select See support and troubleshooting information, enter

the model number of the computer, and press Enter.

ENWW

When the computer is plugged into an AC power source, there

Basic Troubleshooting