en
The illustrations referred to in the text
are shown on the fold-out pages at
the end of these operating
instructions.
Preparing for use
Attach the electro suction hose (dia.
1)
^ Insert the hose connector into the
suction socket until it clicks into
position.
To detach the electro suction hose
(dia. 2)
^ Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Connect the comfort handle to the
electro telescopic suction tube (dia.
3)
^ Insert the comfort handle into the
electro telescopic suction tube until it
clicks into position.
^ To release the handle from the
suction tube, press the release
button.
To adjust the electro telescopic tube
(dia. 4)
One part of the electro telescopic tube
is packed inside the other and can be
adjusted to suit your height for
comfortable vacuum cleaning.
^ Press the release button to release
the electro tubes and adjust to the
required height.
34
Connect the electro telescopic
suction tube to the Electrobrush (dia.
5)
^ Insert the electro telescopic suction
tube into the Electrobrush until it
clicks into position.
For further information on use and
maintenance please refer to the
separate instructions supplied with the
Electrobrush.
Using the Electrobrush
Please observe the flooring
manufacturer's cleaning and care
instructions.
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following Electrobrushes:
– Electrobrush SEB 217-3
– Electrobrush SEB 236
The Electrobrush is particularly suitable
for intensive vacuuming of carpets
which are subject to hard wear. It is
very effective at removing deep seated
dirt and preventing areas of frequent
use being trodden into a path.
,
Please note that the Electrobrush
should not be used for vacuuming
deep-pile rugs and carpets or
valuable hand-knotted rugs and
carpets, e.g. Persian and oriental
rugs etc. There is a danger of the
threads being pulled out. If in doubt,
contact the carpet manufacturer/
retailer.
Stampa la pagina