Miele K 12020 S Istruzioni per l'uso e l'installazione - Pagina 28

Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Frigorifero Miele K 12020 S. Miele K 12020 S 44.

Stampa la pagina

Cleaning and care

E-Cloth

^ A microfibre "E-Cloth" is available

from the Miele UK Spare Parts

Department or via the internet at

www.miele-shop.com. This is suitable

for cleaning surfaces such as

stainless steel, glass, plastic and

chrome without the use of chemicals.

Never use cleaning agents

containing abrasive substances

such as sand, soda, acids, chlorides

or chemical solvents.

"Non-abrasive" cleaning agents are

also unsuitable as they can cause

matt areas to appear.

Make sure that water cannot get into

the On/Off and temperature control

unit, the light or the ventilation gaps.

Do not let water get into the

drainage channel and drain hole

when cleaning.

Never use steam cleaning

apparatus to defrost or clean the

appliance. Steam could reach the

electrical components and cause a

short circuit.

The data plate located inside the

appliance must not be removed. It

contains information which is

required in the event of a service

call.

Before cleaning

^ Switch the appliance off by turning

the On/Off and temperature selector

to "0" and withdrawing the plug.

^ Take any food out of the appliance

and store it in a cool place.

^ Defrost the freezer compartment

(depending on model).

^ Take out any removable parts, e.g.

shelves, for cleaning.

Cleaning the outer casing, the

interior and accessories

^ Clean the refrigerator section at least

once a month and the freezer

compartment (depending on model)

each time it is defrosted.

^ Accessories and shelves should all

be hand-washed only.

^ Clean the condensate channel and

drain hole frequently, so that

condensate can drain away

unhindered. Use a straw or similar to

clear the drain if necessary.

^ After cleaning wipe the outer casing,

interior and accessories with a damp

cloth and dry with a soft cloth. Leave

the doors open to air the appliance

for a short while.

Ventilation gaps

^ The ventilation gaps should be

cleaned on a regular basis with a

brush or vacuum cleaner. A build-up

of dust will increase the energy

consumption of the appliance.