Miele K 12820 SD cs Manuale operativo e di installazione - Pagina 31

Sfoglia online o scarica il pdf Manuale operativo e di installazione per Frigorifero Miele K 12820 SD cs. Miele K 12820 SD cs 48. Refrigerator with dynamic cooling

Miele K 12820 SD cs Manuale operativo e di installazione
Repairs to electrical appliances
should only be carried out by a
suitably qualified and competent
person in strict accordance with
current local and national safety
regulations. Repairs and other work
by unqualified persons could be
dangerous.
What to do if . . .
. . . the appliance does not get cold.
^ Check whether the appliance has
been switched on. The temperature
display must be lit up.
^ Check that the plug is correctly
inserted into the socket and switched
on.
^ Check that the mains fuse has not
tripped. If it has, there could be a
fault with the refrigerator, the
household electricity supply or
another appliance.
Contact a qualified electrician or the
Miele Service department.
. . . the temperature in the refrigerator
section is too low.
^ Set the required temperature.
^ The Super cool function is still
switched on. Super cool will switch
itself off after 6 – 12 hours.
. . . the compressor is switching in
too frequently and for too long.
^ Check whether the ventilation gaps
have been covered over or become
dusty.

Problem solving guide

^ Check whether the metal grille (heat
exchanger) at the back of the
appliance has become dusty.
^ The appliance door is being opened
frequently.
^ Check that the door has been closed
properly.
. . . the interior lighting in the
refrigerator is not working.
^ Was the refrigerator door left open for
too long? The lighting switches itself
off automatically after approx. 15
minutes if the door is left open.
If this is not the case, then the interior
lighting is defective.
^ Call Miele Service.
The LED lighting may only be repaired
or replaced by a service technician.
There are live electrical components
under the cover. Danger of injury and
damage to the appliance.
Do not remove the cover. If the
cover is damaged or needs to be
removed due to damage, exercise
caution. There are lasers in the
lighting (laser beam class 1M) which
you should avoid looking at directly.
Do not use optical instruments
(magnifying glass or similar) to look
at the lighting either.
31