Miele CS 1223 Istruzioni per l'uso e l'installazione - Pagina 28
Sfoglia online o scarica il pdf Istruzioni per l'uso e l'installazione per Piano di cottura Miele CS 1223. Miele CS 1223 48. Induction wok
Anche per Miele CS 1223: Istruzioni per l'uso e l'installazione (40 pagine), Istruzioni per l'uso e l'installazione (44 pagine), Istruzioni per l'uso e l'installazione (40 pagine), Istruzioni per l'uso e l'installazione (44 pagine)
Stampa la pagina
Cleaning and care
Ceramic surface
Do not use washing-up liquid to
clean the ceramic surface.
Washing-up liquid will not remove all
soiling and deposits. It will form an
invisible coating which will cause
permanent discolouration of the
ceramic surface.
Clean the appliance regularly with a
suitable ceramic hob cleaning agent.
Wipe all coarse soiling off using a
damp cloth. Stubborn soiling may need
to be removed with a shielded scraper
blade.
Then clean the appliance with Miele
ceramic and stainless steel hob
cleaning agent (see "Optional
accessories") applied with kitchen
paper or a clean cloth. Do not apply
cleaning agent whilst the appliance is
still hot, as this could result in marking.
Please follow the manufacturer's
instructions.
Finally, wipe the appliance with a damp
cloth, then polish with a soft, dry cloth.
Ensure that all cleaner residues are
removed. Residues can burn onto the
appliance the next time it is used, and
cause damage to the ceramic surface.
Spots caused by limescale, water and
aluminium residues (spots with a
metallic appearance) can be removed
using Miele's ceramic and stainless
steel hob cleaning agent.
28
Should any sugar, plastic or
aluminium foil spill or fall onto the hot
appliance while it is in use, first switch
off the appliance. Then carefully scrape
off all the sugar, plastic or aluminium
residues from the applianace whilst
they are still hot using a shielded
scraper blade. Take care not to burn
yourself.
Allow the appliance to cool down, and
then clean as described above.
Stainless steel
Miele's ceramic and stainless steel hob
cleaning agent is suitable for cleaning
stainless steel surfaces (see "Optional
accessories").
To help prevent re-soiling, we
recommend a stainless steel
conditioning agent (see "Optional
accessories").
Apply sparingly with a soft cloth.
Do not use the ceramic and
stainless steel hob cleaning agent
on printed surfaces. This would rub
off the print. These areas should be
only cleaned with an E-Cloth or with
a solution of warm water and a little
washing-up liquid applied with a soft
sponge.