Miele KM 34 Series Informazioni tecniche - Pagina 22

Sfoglia online o scarica il pdf Informazioni tecniche per Piano di cottura Miele KM 34 Series. Miele KM 34 Series 25.

Technical Information

Service

4.1

1. Disconnect the cooktop from the power supply.

2. Close the gas tap.

3. Cooktop Surface Removal, Section 010-4.1.

4. Remove the appropriate switch from the burner tap (lift it off its shaft to

remove), cutting cable ties as necessary.

5. Disconnect the switch connections from the electronic.

4.2

Note:

If the cooktop is being converted to operate with a different type of gas,

always replace the main and simmer adjustment jets together.

1. Disconnect the cooktop from the power supply.

2. Close the gas tap.

3. Cooktop Surface Removal, Section 010-4.1.

4. Remove the switches (Section 020-4.1).

5. Unscrew the simmer adjustment jet(s) (Figure 020-1, Items 1 and 2) with a

small flathead screwdriver. (Wok burners have 2 jets each; normal/fast

burners have only one.)

6. Remove the simmer adjustment jet(s) using needlenose pliers.

7. Install new simmer adjustment jets. It is essential to install new simmer

adjustment jets appropriate for the type of gas in use; see Table C-2.

8. Main Jet Replacement, Section 010-4.4 (if converting to a different gas

type).

9. Attach the sticker supplied with the new jets over the sticker with gas details

(on the underside of the appliance).

10. Leakage Test, Section 020-4.8.

11. Treat the jets with locking compound to prevent them from loosening.

12. Burning Properties Test, Section 010-4.7.

13. Automatic Re-Ignition Test, Section 010-4.9.

KM 34xx Gas Cooktops