Miele KM 360 G Manuale di istruzioni per l'installazione - Pagina 4

Safety instructions for installation



Damage from falling objects.

Take care not to damage the cooktop when fitting wall units or a rangehood

above it.

Fit the wall units and the rangehood before the cooktop.



The veneer or laminate coatings of worktops (or adjacent kitchen

units) must be treated with 100 °C heat-resistant adhesive which will

not dissolve or distort. Any splashbacks must be of heat-resistant

material as well.



The cooktop must not be installed over a fridge, fridge-freezer,

freezer, dishwasher, washing machine, washer-dryer or tumble dryer.



A gas cooktop must not be installed directly next to a deep fat

fryer as the gas flames could ignite the fat in the fryer. It is essential

to maintain a distance of at least 300 mm between these two

appliances.



When installing the cooktop, make sure that the gas hose and

electrical connection cable cannot come into contact with hot

appliance parts.



The electrical cable and any flexible gas connection pipes must be

installed in such a way so that they do not come into contact with

any moving kitchen parts (e.g. a drawer), and cannot become

trapped.



This cooktop is not suitable for installation and operation with

aftermarket lids or covers fitted.



This appliance must not be installed and operated in mobile

installations (e.g. on a ship).



Carefully observe the safety clearances listed on the following

pages.

All dimensions in this instruction booklet are given in mm.