Bürkert Magnetventil 6013 Istruzioni per l'uso - Pagina 2

Sfoglia online o scarica il pdf Istruzioni per l'uso per Unità di controllo Bürkert Magnetventil 6013. Bürkert Magnetventil 6013 4. 2/2-way solenoid valve

Stampa la pagina

Destruction of the coil by overheating!

▶ Connect the coil electrically only when the housing has been installed.

In the case of AC voltage pay attention to movable core.

To prevent injury, ensure that:

▶ Do not supply the medium connectors of the system with aggressive

or flammable mediums.

▶ Do not make any external modifications to the device bodies. Ensure

that the system cannot be activated unintentionally.

▶ Installation and repair work may be carried out by authorized techni-

cians only and with the appropriate tools.

▶ After an interruption in the power supply or pneumatic supply, ensure

that the process is restarted in a defined or controlled manner.

▶ Do not put any loads on the body.

▶ Observe the general regulations of technology.

Medium temperature:

Operating

Sealing material

principles

CFA

FKM

PTFE/Graphite

CFB

FKM

Ambient temperature:

-10 ... +55 °C

Viscosity:

21 mm/s

Protection class:

IP65 in accordance with EN 60529 with

cable plug

Media:

neutral gaseous and liquid media, which do not attack

body and sealing materials (see table of resistance under

www.burkert.com)

Check resistance in individual cases

4.5 Type label (example)

Sealing material

Orifice

Circuit function

Type

6013 A 2,0 FKM MS

G1/8 PN 0 - 10 bar

24V

00450000

Ident. no.

Voltage, Frequency, Output

Nominal connection pressure

english

Medium temperature

-10 ... +100 °C (PA Coil)

-10 ... +120 °C (Epoxide Coil)

-10 ... +180 °C

-10 ... +100 °C (AC)

-10 ... +120 °C (DC)

Body material

50Hz

WXXXX

if applicable

english

TECHNICAL DATA

4.1 Conformity

In accordance with the EC Declaration of conformity, the solenoid

valve Type 6013 is compliant with the EC Directives (if applicable).

4.2 Standards

The applied standards, which verify conformity with the EC Directives,

can be found on the EC-Type Examination Certificate and / or the EC

Declaration of Conformity (if applicable).

4.3 Operating conditions

WARNING!

Heat sources and temperature fluctuations may cause malfunc-

tions or leaks!

▶ If the device is used outdoors, do not expose it unprotected to the

weather conditions.

▶ Avoid heat sources which may cause the allowable temperature

range to be exceeded.

4.4 Fluidic data

Operating principle

2 (A)

2/2-way valve, normally closed

(NC)

1 (P)

2 (B)

2/2-way valve, normally open

(NO)

1 (P)

Pressure range:

see type label

Line connectors:

Type 6013: G1/8, G1/4, G3/8, Flange

Type 6013A: G1/8, G1/4

Note the information specified on the type label for voltage, type

of current, and pressure.

english

4.6 Electrical data

Connections:

DIN EN 175301-803 Form A

for cable plug Type 2508

Supply voltage:

Type 6013: 24 V DC ± 10 %

max. residual ripple 10 %

24 V / 50 Hz

230 V / 50 Hz

Type 6013A: 24 V DC ± 10 %

max. residual ripple 10 %

230 V / 50 Hz

± 10 %

Voltage tolerance:

Nominal output:

CFA: 8 W (5 W, 10 W)

CFB

AC: 7 W (9 W)

DC: 8 W

Impulse version DC: 7 W

Nominal operating mode:

100 % continuous operation

for block installation:

5 W continuous operation

on request a. A.

8 W intermittent operation 60 %

(30 min)

Type 6013