3A HEALTH CARE HAPPYNEB II Manuale - Pagina 6

Sfoglia online o scarica il pdf Manuale per Prodotto respiratorio 3A HEALTH CARE HAPPYNEB II. 3A HEALTH CARE HAPPYNEB II 17.

Stampa la pagina

PROFESSIONAL PISTON COMPRESSOR NEBULISER

Piston compressor

Power cord

ON/OFF Switch

Dear Customer, This nebuliser is a high-quality device for inhalation the-rapy for asthma, chronic bronchitis, and other re-

spiratory illnesses. This medical device generates aerosols with variable characteristics to adapt to the patient's respiratory

pathology and generating a medicinal mist of particles that are small enough to reach even the deepest regions of your lungs

and be of maximal benefit.The operation and usage of the device is very straightforward. All common liquid medication can

be used for inhalation therapy.Please read through these instructions carefully so that you understand all functions and safety

information. We want you to be happy with your Happyneb II product. For any further questions you may have, please ask

your chemist or usual retailer.

IMPORTANT SAFETY INSTRUCTIONS

This device may only be used for the purposes described in this booklet. The manufacturer cannot be held liable for dama-

ge caused by incorrect application. This device is not suitable for anaesthesia and lung ventilation.This device should only

be used with original accessories as shown in these instructions. Do not use the device if you think it is damaged or notice

anything unusual. Never open the device. This device comprises sensitive components and must be treated with caution.

Observe the storage and operating conditions described in the «Technical Specifications» section. Protect it from: - water and

moisture - extreme temperatures - impact and dropping - contamination and dust - direct sunlight - heat and cold. Only use

the medication prescribed for you by your doctor and follow your doctor's instructions with regard to dosage, duration and

frequency of the therapy.

All accessories should only be used by one person. Never bend the nebuliser over 60°.

Ensure that children do not use the device unsupervised some parts are small enough to be swallowed.

Use of this device is not intended as a substitute for consultation with your physician.

PREPARATION AND USAGE OF THIS DEVICE

Prior to using the device for the first time, we recommend cleaning it as described in the section «Cleaning and Disinfecting».

1 Assemble the nebuliser kit 12 Ensure that all parts are complete.

2 Fill the nebuliser with the inhalation solution as per your doctor's instructions. Ensure that you do not exceed the maximum

level. 3 Connect the nebuliser with the air hose 6 to the compressorm 1 and plug the power cord 2 into the socket. 4. Switch

the ON/OFF switch 3 to position «I» to turn on the device and place the mouthpiece 7 in the mouth or fit one of the face

masks over mouth and nose. The mouthpiece gives you a better drug delivery to the lungs. Choose between adult 8 or child

face mask 9 and make sure that it encloses the mouth and nose area completely. 5. Breathe in and out calmly during the

therapy. Sit in a relaxed position with the upper body upright. Do not lie down while inhaling. Stop inhalation if you feel

unwell. 6 After completing the inhalation period recommen-ded by your doctor, switch the ON/OFF switch 3 to position «O»

to turn off the device and unplug it from the socket. 7 Empty the remaining medication from the nebuliser and clean the device

as described in the section «Cleaning and Disinfecting».

FASTERJET NEBULIZER

This compressed air system for aerosoltherapy is equipped with the innovative Fasterjet nebuliser with a breath enhanced valve

system. This enables the correct quantity of medication to be featured to the respiratory capacity of each patient.

The valve controls the ﬂ ow of medication during inhalation, thus reducing medication loss during exhalation.

Fasterjet increases the quantity of inhaled medication.

Fasterjet is capable of nebulising effi ciently all medications for inhalation therapy.

A synchronized functioning of the nebuliser is possible only by using the mouthpiece with expiratory valve. In order to increase

nebulising speed, it is recommended to remove the inhalation valve (white support) when using a mask or a nose fork.

CLEANING AND DISINFECTING

Thoroughly clean all components to remove medication residuals and possible impurities after each treatment.The compressor

1 and the air hose 6 should be clea-ned with a clean, moist cloth.

Always wash your hands well before cleaning and disinfecting the accessories.

Do not expose the compressor to water or heat.

Replace the air hose for each treatment with a new patient or in case of impurities.

Air filter compartment

Fasterjet Nebulizer

Air hose

Mouthpiece

Adult face mask

Child face mask

Nosepiece

Replacing air filter

Assembling nebuliser kit