ALLOWANCE 100 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Controllore ALLOWANCE 100. ALLOWANCE 100 15. Television time manager

numbers 1 through 4 the display will blink "Cn" where n is 1 through 4, and the LED corresponding to that child

will light up. You then enter the 4 digit Child Access Code for that child and press the ENTER key.

If you make a mistake or wish to change the digits entered then keep pressing digits until the display shows the

access code you want to use and then press the ENTER key.

You may also press the CLEAR key to abort the entering of an access code, if you do this after you have started

entering numbers then the display flashes "Cn" and you can start over.

If you press CLEAR or ENTER when the display is flashing "Cn" (before you have started entering numbers)

then the code function is aborted and you placed back into PARENT MODE.

As an example if child one is to have access code 9999 you would press the following keys:

Key(s) Pressed

CODE 1

9999 ENTER

4.2. ALLOW KEY – CHANGE A WEEKLY TIME ALLOWANCE

To change a time allowance for a child you must press the ALLOW key followed by one of the digits 1, 2, 3, or

4 (corresponding to which child's time allowance is being changed). After entering one of the numbers 1

through 4, the display will blink "An" where n is 1 through 4, and the LED corresponding to that child will light

up. You then enter the hours (2 digits) and minutes (2 digits) of that child's Weekly Allowance and press the

ENTER key.

The maximum Weekly Time Allowance is 99 hours and 99 minutes.

If you make a mistake and wish to change the digits entered then keep pressing digits until the display shows the

access code you want to use and then press the ENTER key.

You may also press the CLEAR key to abort the entering of hours and minutes; if you do this after you have

starter entering numbers then the display flashes "An" and you can start over.

If you press CLEAR or ENTER when the display is flashing "An" (before you have started entering numbers)

then the allow function is aborted and you are placed back into PARENT MODE.

As an example: if child is to have 2 hours and 5 minutes of time per week you would press the following keys

while in Parent Mode:

Key(s) Pressed

ALLOW 1

Action Taken

The display blinks "C1", the TV Allowance beeps, and LED 1

lights up.

Note: If you press CLEAR or ENTER before you have entered any

numbers then the code function aborts and you are back in parent

mode.

9999 is set for child one's Access Code, the TV Allowance beeps,

and LED 1 goes out. The Parent light remains on.

Note: If you press CLEAR before you press ENTER and after you

have entered some number or numbers then the display light

flashes "C1" and you can begin to enter the access code again.

Action Taken

The display blinks "A1" , the TV Allowance beeps, and LED 1

lights up.