Alloy Network Device BWS-136 Manuale d'uso - Pagina 5

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale Alloy Network Device BWS-136. Alloy Network Device BWS-136 18. Alloy computer products network device user manual

Stampa la pagina
SW1 Setting:
SW1 Key
1
2
RS-232
ON
OFF
RS-422
OFF
OFF
RS-485
OFF
ON
Normal
-
-
DHCP
Default
Console
Normal: Aport is in Normal Operation Mode
DHCP: Network IP Address is assigned by DHCP Server
Default: All the settings are reset to Factory Default.
Console: COM1 serial port is served as console port. User can
use ACSII command to configure BWS-136 via COM1 port.
Please refer to Appendix I for the ASCII command
Changing the switch settings will not be effective until
system reboot by pressing RESET button
BWS-136 User Manual_amend.doc
3
4
5
OFF
-
-
OFF
-
-
ON
-
-
-
OFF
OFF
OFF
ON
ON
OFF
ON
ON
- 9 -

LED Status

The LED provides the BWS-136 operation information. The
LED status is described as follow:
Power LED: Power LED keeps ON if power (+9VDC to +40VDC)
is correctly input to BWS-136.
Ready LED: Ready LED keeps ON when Aport 211 firmware is
ready for operation. Ready LED will be flash when Aport 211 in
Serial Console mode (SW1 key 4 and key 5 are ON) or Telnet
Console mode (Telnet Console port:5001 are connected)
Link/Act LED: Link and Activity LED will turn ON when the
Ethernet cable is connected. When there is network data traffic,
this LED will be flash.
RX/TX LED: The RX/TX LED is a dual color LED that indicates
the serial data traffic. In RS-232 mode, the Yellow LED stands
for transmitting data and Green LED means receiving data. In
RS-422/485 mode, the Yellow LED stands for receiving data and
Green LED means transmitting data.
BWS-136 User Manual_amend.doc
- 10 -