Alloy POE100 Series Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Convertitore multimediale Alloy POE100 Series. Alloy POE100 Series 9. 10/100 base-tx to 100base-fx converter poe power provider

Stampa la pagina

3. Checklist

Before you start installing the POE converter, please verify that the package

contains the following items.

The POE100 Series

AC Power Cord

CD containing this manual

Please notify your sales representative if any of the above items are missing

or damaged.

4. Installing the Converter

4.1 POE100 converter with a Powered Device (PD)

1. Connect the POE100 converter to an AC power source.

2. Connect the copper cable to your IEEE 802.3af compliant PD device.

e.g. Wireless Access Point, IP Phone, IP Camera

Note:

The POE100 can also work as a standard media converter and

connect to a non POE device.

3. Connect the fibre cable to your connecting device.

Default: Auto

Auto or Force setting, see figure 10. S1-Bit 1

Attach Cat. 5 cable to the copper port and ensure the cable run is not

Port

over 100m in distance.

The Copper port supports Auto MDI-X, therefore there is no need to

use a cross-over cable when connecting to a switch.

Fibre

Default: 100FDX

Port

"100FDX"/"100HXD" setting, see figure 10. S1-Bit 5