DiamaPro Systems SVX3-A Manuale d'uso - Pagina 4

Sfoglia online o scarica il pdf Manuale d'uso per Aspirapolvere DiamaPro Systems SVX3-A. DiamaPro Systems SVX3-A 14. Industrial vacuum
Anche per DiamaPro Systems SVX3-A: Manuale d'uso (13 pagine)

Stampa la pagina

12. USING THE VACUUM CLEANER

Before switching ON the vacuum be sure the

container is empty

I - 3 Motors switch ON

O - Switch OFF

13. FILTER REPLACEMENT

1. Disconnect and lift the head.

2. Remove the filter's cylindrical

steel protection

(unscrewing the screws on the

edge)

3. Unscrew the wing nut and

remove the spring and washer

4. Replace the filter with a proper

one for the vacuum cleaner

in use

Push for forced filters

cleaning

Socket

5. Install the new filter according to

the label on the bottom of the filter

• Washer with rubber part facing

the base of the

filter

• Spring

• Plastic wing nut

6. Mount the cylindrical protection,

then reconnect the head on the

filtering chamber

14. TROUBLESHOOTING

You can thus solve any problem that may occur.

Motors do not start.

u No electrical voltage. u Check cables, plugs and socket.

Suction capacity decreases slowly.

u Filter, nozzle, suction hose or suction pipe may be blocked.

u Check, clean accessories. Clean filter.

Dust comes out during the vacuuming.

u Filter has not been fastened correctly or is defective.

u Check to see if filter is sitting properly; replace if required.

15. COLLECTION BAG USE

The dust and the particles are collected in a bag placed in the container

under the hopper.

The Infinity Bag system consists in a plastic tubular from which are ob-

tained 20/30 bags of different weights and dimensions.

Once finished or damaged, the tubular must be replaced by a new refill.

The operations below described must be carried out when machine is

turned off.

1 - Close the bag with two

distanced bands.

2 - Cut the strip between the

two bands.

3 - Pull the Infinity Bag end to

make a new bag.