Miller Coolmate 3.5 CE Manuale d'uso - Pagina 15

Sfoglia online o scarica il pdf Manuale d'uso per Sistema di saldatura Miller Coolmate 3.5 CE. Miller Coolmate 3.5 CE 20.

Stampa la pagina

SECTION 6 − MAINTENANCE & TROUBLESHOOTING

6-1. Routine Maintenance

n = Check

* To be done by Factory Authorized Service Agent

Every

Months

Every

Months

nlHoses

6-2. Coolant Maintenance

A complete Parts List is available at www.MillerWelds.com

Z = Change

~ = Clean

~Coolant Strainer,

durning heavy service,

clean more frequently.

nl Labels

Δ = Repair

~ Blow out heat exchanger fins.

nCheck coolant level. Top off with

distilled or deionized water if necessary.

ZReplace coolant.

Disconnect power

before maintaining.

l = Replace

Disconnect cooler plug from

welding power source receptacle

before maintaining.

Dispose of used coolant accord-

ing to national, state, and local

codes. Do not pour down drain.

Coolant Filter

Unscrew housing to clean filter.

Changing Coolant

Drain coolant by tipping unit to rear, or

use suction pump. Fill with clean water

and run for 10 minutes. Drain and refill

with coolant (see section 4-3).

NOTICE − If replacing hoses, use hoses

compatible with ethylene glycol, such as

Buna-n,

Neoprene,

Hypalon.

Oxy-acetylene hoses are not compati-

ble with any product containing ethylene

glycol.

Install cover if removed.

Tools Needed:

m30 Torx

Ref. 804649-B

OM-231313 Page 11