Miller Gold Seal 422 Manuale d'uso - Pagina 16
Sfoglia online o scarica il pdf Manuale d'uso per Sistema di saldatura Miller Gold Seal 422. Miller Gold Seal 422 37. Arc welding power source and wire feeder
3-6. Threading Welding Wire
Tools Needed:
Open pressure assembly.
Close and tighten pressure
assembly, and let go of wire.
Press gun trigger until wire comes
out of gun.
OM-187 926 Page 14
2
1
3
.
Pull and hold wire; cut off end.
Tighten
Remove gun nozzle and contact tip.
Reinstall contact tip and nozzle.
4
5
6
Hold wire tightly to keep it
from unraveling.
6 in
(150 mm)
Feed wire to check drive roll pressure.
Tighten knob enough to prevent slipping.
Cut off wire. Close and latch door.
1
Wire Spool
2
Welding Wire
3
Inlet Wire Guide
4
Pressure Adjustment Knob
5
Drive Roll
6
Outlet Wire Guide
7
Gun Conduit Cable
Lay gun cable out straight.
7
4 in
(102 mm)
Push wire thru guides into gun;
continue to hold wire.
Turn power on.
WOOD
Ref. ST-802 024 / Ref. ST-187 921