Miller 22A Manuale d'uso - Pagina 19

Sfoglia online o scarica il pdf Manuale d'uso per Accessori per la saldatura Miller 22A. Miller 22A 40. Wire feeder

Stampa la pagina

5-2. Equipment Connection Diagrams

1
3
2

5-3. 14-Pin Plug, Shielding Gas And Optional Volt Sense Lead

3
2
Tools Needed:
5/8, 11/16 in.
4
115VAC
Contactor
4
1
4
1
CV Welding Power Source
With 24 VAC Power
2
CV Welding Power Source
Without 24 VAC Power
3
115 Volts AC /24 Volts AC
Power Adapter
4
14-Pin Control Cord
5
Weld Cable (Required)
6
Work
6
5
6
5
1
Gas Hose With 5/8-18 Right-
hand Thread Fittings
(Customer Supplied)
.
Shielding gas pressure not to
exceed 100 PSI (689 kPa).
2
14 Pin Plug PLG2
Use plug to make connection to
welding power source.
3
Optional Volt Sense Lead
(Part Of Meter Option)
!
Weld voltage is present at
voltage sensing clamp
when wire feeder and weld-
ing power source are on.
This condition exists even if
wire feeder lights and
meters are off.
Turn off wire feeder or weld-
ing power source before
handling or moving voltage
sensing clamp.
Connect to work.
4
Power Switch
802 349-A
OM-193472 Page 15