Miller Classic Clearlight Manuale d'uso - Pagina 21
Sfoglia online o scarica il pdf Manuale d'uso per Accessori per la saldatura Miller Classic Clearlight. Miller Classic Clearlight 44. Auto-darkening helmets
Stampa la pagina
5-9.
Lens Delay Control
Variable Shade Helmets
2
Variable Shade Lens Assembly
VSi Helmets
VSi Lens Assembly
OM-252052 Page 8
1
1
Lens Delay Control
The lens delay control is used to
adjust the time for the lens to switch
to the clear state after welding.
The delay is particularly useful in
eliminating bright after-rays pres-
ent in higher amperage applica-
tions where the molten puddle re-
mains bright momentarily after
welding.
Variable Shade helmet adjusts
from Slow to Fast and VSi helmet
adjusts from Min to Max (0.1 to 1.0
second).
1
1
Lens Delay Control
The lens delay control is used to
adjust the time for the lens to switch
to the clear state after welding.
The delay is particularly useful in
eliminating bright after-rays pres-
ent in higher amperage applica-
tions where the molten puddle re-
mains bright momentarily after
welding.
1
Variable Shade helmet adjusts
from Slow to Fast and VSi helmet
adjusts from Min to Max (0.1 to 1.0
second).
OM-252052 Page 1
1 Lens
Delay
Adjustment
Buttons (Knob On VSi
Helmets)
2 Mode Control Button
Use the Lens Delay + and –
buttons on the Variable Shade
Lens or the Lens Delay knob
on the VSi Lens to adjust the
time for the lens to switch to
the clear state after welding or
cutting.
The delay is particularly useful
in eliminating bright after-rays
present in higher amperage
applications where the molten
puddle remains bright mo-
mentarily after welding. Use
the Lens Delay Control but-
tons to adjust delay from low
to high range (0.1 to 1.0
second).
The delay ranges for each
mode are as follows:
Weld and Cut Modes Low to
high range (0.1 to 1.0 second)
Grind
Mode
No
adjustment
�
There is no lens delay
adjustment in the Grind
mode, and in the Cut
mode (when sensitivity
is set to max).
Lens Delay Adjustment Pro-
cedure For Variable Shade
Helmet
� Press Mode button to turn
lens on.
� Press Mode button to se-
lect desired mode: Weld
or Cut.
� Use + and – adjustment
buttons to select desired
delay.
� Begin welding or continue
with
other
adjustments.
OM-288583 Page 18
delay
lens