Miller RFCS-6M Manuale d'uso - Pagina 7
Sfoglia online o scarica il pdf Manuale d'uso per Accessori per la saldatura Miller RFCS-6M. Miller RFCS-6M 16. Foot controls
Anche per Miller RFCS-6M: Manuale d'uso (12 pagine), Manuale d'uso (16 pagine)
Stampa la pagina
1-4. Remote Amperage Control For Welding Power Source With Remote Control Switch
But Without Output (Contactor) Control
Example Of Combination Front Panel
And Remote Amperage Control
.
See welding power source
Owner's Manual to determine
if Remote Foot Control works
as a combination or as full Am-
perage control.
Set Switch
Example Of Full Remote Amperage Control
.
See welding power source
Owner's Manual to determine
if Remote Foot Control works
as a combination or as full Am-
perage control.
Set Switch
Set Desired Maximum
Amperage For Application
OR
Control Setting
Does Not Matter
In Example:
Min = 30 A In Range A or 40 A In
Range B (Unit Minimum)
Max = 95 A In Range A or 200 A In
Range B (Control Setting)
Unit Minimum
Control Setting
Press pedal to increase weld
output. Release
pedal
decrease weld output.
In Example:
Min = 30 A In Range A or 40 A
In Range B (Unit Minimum)
Max = 225 A In Range A or 375 A In
Range B (Unit Maximum)
Unit Minimum
Unit Maximum
Press pedal to increase weld
output. Release
pedal
decrease weld output.
Ref. 122023-B / 801736
OM-844 Page 3
to
to