3B Optic Instruments PD-100 Manuale d'uso - Pagina 13
Sfoglia online o scarica il pdf Manuale d'uso per Strumenti di misura 3B Optic Instruments PD-100. 3B Optic Instruments PD-100 20. Digital pupillometer
Stampa la pagina
Warnings and Cautions
! Caution: This instrument must be used by especially trained personnel.
! Caution: Read this user guide before using this instrument.
! Caution: Do not use the PD-150 in the presence of flammable anesthetic
mixtures with air or with oxygen or nitrous oxide.
! Caution: Do not dispose of the device or any of its accessories with house
waste. Check local regulations for proper disposal. It's responsibility of the
user handed over to a designated collection point for recycling of electrical and
electronic or contact the manufacturer or the authorized representative of the
manufacturer to proceed with disposal in a safe and environmentally friendly
manner appliance.
! Warning: Keep the PD-150 in a cool, dry, dust-free environment.
! Warning: Make sure the patient's window is always clean; you may use a
lens tissue or a clean, dry soft cloth to clean this window.
! Warning: Do not use alcohol or other strong cleaning solutions to clean the
outer surface, windows or screen of this instrument or damage to these parts
may occur.
! Warning: Try not to hit or get whet this instrument.
! Warning: After using this instrument keep it in the original pack.
! Warning: Do not use this instrument with patients that present ulcers in the
area of contact with the equipment.
The manufacturer is not responsible for the safety and reliability of this instru-
ment when:
• The instrument is assembled, disassembled, repaired or modified by unautho-
rized dealers or persons.
• The instrument is not used in accordance to this User's Guide.
Components
1 - On/Off Button
This button turns the unit on or off. When pressed on, the
instrument starts a self – test routine. Once this routine has
been completed, the unit is ready for operation.
2 - Measurement Slide Buttons
The Measurement Slide Buttons are pressed to adjust the
position of the Index Lines for accurate measurement of the
interpupillary distance (PD) and Right/Left Nose-to-Pupil
Distance (R/L NPD). During the measurement process,
each measurement slide is positioned so that the index line
is over the center of the corneal reflection light at the center
of the patient's pupil.
Note: When one of the measurement slides is moved too far to the left or to the right by
pressing the respective button, the Digital Display will show "00,o" on that side of the
screen, indicating that it must be repositioned within the span signal.
3 - Infrared Communication Port
By means of this Infrared Communication Port the measurement data can be immediately
transferred to a printer or personal computer without using a standard printer cable.
REV: 02
Last Rev: 04-07-2016
- 11 -