Miller 1014 Manuale dell'operatore - Pagina 6
Sfoglia online o scarica il pdf Manuale dell'operatore per Camera Accessories Miller 1014. Miller 1014 12. Arrow series fluid head with euro camera platform
![Miller 1014 Manuale dell'operatore](/uploads/products/server2/3573288/3573288.jpg)
OPERATING INSTRUCTIONS
The Operating Instructions for Arrow series fluid heads are
described in six (6) steps. Please read and understand these
instructions before using this equipment. Do not omit any
step.
1 INSTALL AND LEVEL THE HEAD
1.1 Unscrew the CLAMP NUT from its threaded stud.
1.2 Place the head in your 100mm tripod bowl and re-fit the
CLAMP NUT. Do not tighten CLAMP NUT.
1.3 Level the fluid head by centering the bubble in the
BUBBLE LEVEL. Then tighten the CLAMP NUT.
1.4 In low light conditions the BUBBLE LEVEL can be
illuminated by pressing the ILLUMINATION BUTTON.
1.5 Note: If adjusting the level with your camera mounted,
first ensure the camera is securely held before loosening
CLAMP NUT.
6
ILLUMINATION BUTTON
BUBBLE LEVEL
TRIPOD BOWL
THREADED STUD
CLAMP NUT
FIG 3