Miller 1020 Manuale dell'operatore - Pagina 8

Sfoglia online o scarica il pdf Manuale dell'operatore per Camera Accessories Miller 1020. Miller 1020 12. Arrow series fluid head with euro camera platform

Stampa la pagina

2 MOUNT YOUR CAMERA Continued

2.5 Attach your camera to the fluid head by holding your

camera slightly 'lens down' and place the attached

CAMERA PLATE under the front lip on the top of the

SLIDING PLATFORM. Lower the back of the camera until

the QUICK RELEASE snaps automatically to the locked

position. Ensure the QUICK RELEASE knob is firmly seated.

2.6 To ensure a successful mount, grip the PAN HANDLE firmly

and then disengage the PAN and TILT LOCKS. Your camera

should be firmly attached with no obvious free movement.

3 CENTRE YOUR CAMERA ON THE HEAD

3.1 With your camera attached to the fluid head, hold the PAN

HANDLE and release the TILT LOCK.

3.2 Turn the TILT DRAG CONTROL knob to position '0'. Turn

the COUNTERBALANCE SELECTOR knob to position '1'.

3.3 Release the SLIDE LOCK lever and slide your camera

forward or backward until balanced over the centre axis of

fluid head. If necessary, be prepared to stop your

camera sliding suddenly. Your camera will remain

static when balanced.

3.4 Re-engage the SLIDE LOCK and TILT LOCK by

turning clockwise until firm.

CENTRE AXIS

SLIDING PLATFORM

SLIDING PLATFORM LOCK

FIG 5