Miller 1078 Arrow fx 3 Manuale dell'operatore - Pagina 4
Sfoglia online o scarica il pdf Manuale dell'operatore per Camera Accessories Miller 1078 Arrow fx 3. Miller 1078 Arrow fx 3 16. Fluid head
Stampa la pagina
Introduction
Thank you for purchasing the Arrow
This Miller product provides the user precise pan and tilt
coordinates through seperated (pan and tilt) outputs. These
outputs can be coupled with other equipment data to provide
augmented visual effects during broadcast and production.
fx
The Arrow
has been designed to suit a wide range of cameras,
lenses and accessories as demanded by ENG, EFP , Studio and
Field OB setups.
The robust design and construction of the Arrow
offers maximum stability, accuracy and durability and includes
precision ball bearing mounted fluid drag plate system in the pan
and tilt assembly to deliver true fluid drag performance over the
entire temperature and payload range.
The fluid drag and the counterbalance system were designed to
provide excellent control and repeatability and offer progressive
equal increments of drag and torque.
fx
The Arrow
fluid head also offers illuminated single control
location for operating pan-tilt, counterbalance and viewing
bubble level.
fx
fluid head.
fx
fluid head
4 3
Safety Instructions
Please use this manual to familiarise yourself with the operation
fx
of the Arrow
fluid head and observe these instructions
to prevent any damage to your equipment. Ensure that all
equipment is operating correctly and free from defects and
damage, also please ensure that the tripod is steady, secure and
that the bowl is approximately horizontal when attaching the
camera. The operator is responsible for the safe operation of this
piece of equipment.
•
Do not exceed the maximum payload capacity of the fluid
head.
•
Do not use magnets near or around the Arrow
effect the magnetic rings.
•
Do not leave the camera unattended on the fluid head.
•
Do not release the SLIDING PLATFORM LOCK whilst the
camera is at an angle.
•
Do not adjust the tripod whilst the camera is attached to the
fluid head.
•
Ensure PAN HANDLE CLAMP and CLAMP NUT is securely
tightened.
•
Apply TILT LOCK when adding/removing equipment from
the camera or when attaching/removing the camera from the
fluid head.
•
Hold camera securely whilst changing counterbalance, pan
drag or tilt drag settings.
•
Hold the camera securely whilst releasing the QUICK
RELEASE KNOB.
•
Hold camera securely whilst adjusting the CLAMP NUT to
level the fluid head.
fx,
this can