Miller 16 CB PLUS 1107 Manuale dell'operatore - Pagina 11

Sfoglia online o scarica il pdf Manuale dell'operatore per Camera Accessories Miller 16 CB PLUS 1107. Miller 16 CB PLUS 1107 16. Fluid head

Operating Instructions

5. Pan-tilt Drag Control

The CiNX 5 & 7 Fluid head offers 7 selectable positions of

fluid drag + zero setting in the Pan and Tilt. The settings are

equally stepped from light drag in position 1 up to heavy

drag in position 7, the drag plates are completely disengaged

in position zero. The CiNX 3 offers 5 selectable positions of

Fluid drag + zero setting.

• Do not Pan or Tilt the Fluid head whilst adjusting PAN

or TILT DRAG CONTROL or whilst the PAN & TIL DRAG

CONTROL is between settings.

• The drag setting can be changed at any tilt or pan angle.

The CiNX Fluid head offers high capacity caliper disc brake

system to hold the Fluid head in a fixed pan and/or tilt

position. Camera position will not change when applying or

releasing the Pan-tilt locks.

• Do not pan or tilt the Fluid head whilst the PAN or the TILT

LOCK is partially applied.

The CiNX Fluid head offers illumination of the PAN &

TILT DRAG CONTROL settings, BUBBLE LEVEL and

PAN & TILT INDICATOR when the low ambient light

conditions exist. Illumination can be achieved by

pressing the ILLUMINATION BUTTON once. The light

will switch off after 10 seconds.

Tilt Drag Setting

Tilt Drag Knob

Tilt Indicator

Illumination Button

Counter Balance Selector

Pan Indicator

Bubble Level

Pan Drag Setting

Pan Drag Knob

Fig. 11