Miller 16 CB PLUS CiNX 3 Manuale dell'operatore - Pagina 6

Sfoglia online o scarica il pdf Manuale dell'operatore per Camera Accessories Miller 16 CB PLUS CiNX 3. Miller 16 CB PLUS CiNX 3 16. Fluid head

Operating Instructions

2. Camera Set-up

2.1 Remove the CAMERA PLATE by pulling and holding

the SAFETY RELEASE PIN then pulling the SIDE LOAD

LOCK LEVER outwards. Press the SAFETY LATCH

BUTTON and remove the CAMERA PLATE from the

BASE PLATE (Fig. 6).

2.2 Attach the CAMERA PLATE to the camera and securely

tighten the screws. Refer to the Camera's owner's

manual for correct method of attachment to the

CAMERA PLATE.

2.3 Attach camera accessories and the battery to the

camera, it is recommended to estimate the camera's

Centre of Gravity (C of G) for the purpose of correctly

positioning the camera on the CAMERA PLATE. The

camera's C of G can be estimated by placing the camera

on to a round rod and then shifting it backwards or

forwards until a balance point – C of G – is achieved. It

is recommended to identify this point on the CAMERA

PLATE as it will be useful in step 2.5.

Camera Plate

Platform

Safety Release Pin

6 6

Safety Latch Button

Side Load Lock Lever

Fig. 6