Miller 480 Manuale dell'operatore - Pagina 5

Sfoglia online o scarica il pdf Manuale dell'operatore per Camera Accessories Miller 480. Miller 480 8. Combination pedestal

SET-UP (CONT)

EXTENDED SET-UP (optional)

The Pedestal can be enlarged using the optional VPS-300 extension (Fig 10.). This

will extend the base height of your pedestal by 300mm.

Placing Extension:

• Remove the three locking screws that hold the column in the base piece using

the supplied hexagon key.

• Take off the Column with spider and lay it aside.

• Mount the extension you need using the same hexagon key.

•

Take the Column and mount it on top of the extension.

•

Loosen the Spider Clamp Ring

with the two locking screws and let

it slide down until the spider legs

fit the ball of dolly end. Then

fasten the Spider Clamp Ring

again with both screws.

Fig 10.