Miller CX6 Manuale dell'operatore - Pagina 6

Sfoglia online o scarica il pdf Manuale dell'operatore per Camera Accessories Miller CX6. Miller CX6 13. 16 cb plus fluid head compassx series

Operating Instructions

4. Pan/Tilt Drag Control

The Compass

Fluid Head offers selectable positions of

fluid drag in the Pan and Tilt (including zero positions). The

settings are equally stepped from lighter drag in position 1

up to heavier drag in position 3 on CX2 and CX6 models and

position 5 on CX8, CX10 and CX18 models, the drag plates

are completely disengaged in position zero.

• Do not pan or tilt the Fluid Head whilst adjusting PAN or

TILT DRAG CONTROL or whilst the PAN and TILT DRAG

CONTROL is between settings.

• The drag setting can be changed at any tilt or pan angle.

5. Pan/Tilt Lock Control

The Compass

Fluid Head offers high capacity caliper disc

brake system to hold the Fluid Head in a fixed pan and/or tilt

position. Camera position will not change when applying or

releasing the Pan-tilt locks.

• Do not pan or tilt the Fluid Head whilst the PAN or the TILT

LOCK is partially applied.

6.Illumination

The Compass

Fluid Head offers illumination of the BUBBLE

LEVEL when the low ambient light conditions exist.

Illumination can be achieved by pressing the LED BUTTON

once. The light will switch off after 10 seconds.

Fig. 5