Miller ICE-100 Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Torcia elettrica Miller ICE-100. Miller ICE-100 28. Air-cooled arc plasma cutting torches
SECTION 4 – OPERATING THE TORCH
WARNING
ELECTRIC SHOCK can kill.
•
Always wear dry insulating gloves.
•
Insulate yourself from work and ground.
•
Do not touch live electrical parts.
•
Keep all panels and covers securely in place.
FUMES AND GASES can be hazardous
to your health.
•
Keep your head out of the fumes.
•
Ventilate area, or use breathing device.
•
Read Material Safety Data Sheets (MSDSs) and
manufacturer's instructions for material cut.
ARC RAYS can burn eyes and skin;
NOISE can damage hearing.
•
Wear face protection with correct shade of filter.
•
Wear correct eye, ear, and body protection.
1
OM-1591 Page 10
2
3
OR
Figure 4-1. Safety Equipment
CUTTING can cause fire or explosion.
•
Do not cut near flammable material.
•
Provide protection from flying sparks.
•
Watch for fire; keep extinguisher nearby.
•
Do not locate unit over combustible surfaces.
•
Do not cut on closed containers.
•
Allow work and equipment to cool before handling.
MOVING PARTS can cause injury.
•
Keep away from moving parts.
•
Keep all doors, panels, covers, and guards closed
and securely in place.
See Safety Precautions at beginning of manual for ba-
sic cutting safety information.
Wear the following while cutting:
1
Dry, Insulating Gloves
2
Safety Glasses With Side
5
Shields
3
Welding Helmet
4
Face Shield
4
Wear either helmet or face shield
with correct shade of filter (See
ANSI Z49.1).
5
Ear Muffs
Wear approved ear muffs or ear
plugs if noise exposure exceeds
OSHA limits.
swarn6.1* 10/91
sb3.1* 1/94