Miller ICE-80CX Manuale d'uso

Sfoglia online o scarica il pdf Manuale d'uso per Torcia elettrica Miller ICE-80CX. Miller ICE-80CX 38. Air-cooled torches for plasma arc cutting

Miller ICE-80CX Manuale d'uso
OWNER'S MANUAL
ICE-12C, ICE-25C, ICE-25CX, ICE-27C, ICE-27T
ICE-40C, ICE-50C, ICE-50CM, ICE-55C, ICE-55CM, ICE-80C, ICE-80CM,
ICE-80CX, ICE-80CXM, ICE-80T, ICE-80TM, ICE-100T, And ICE-100TM Torches
1.
Specifications
Air-cooled torches for plasma arc cutting (PAC)
12 A model: 12 A at 35% duty cycle;
25 A model: 25 A at 35% duty cycle;
27 A model: 27 A at 35% duty cycle;
40 A model: 40 A at 50% duty cycle;
50 A models: 50 A at 60% duty cycle;
55 A model: 55 A at 60% duty cycle;
80 A model: 80 A at 50% duty cycle
100 A model: 100 A at 80% duty cycle
12 A model equipped with 20 ft (6.1 m) cable
25 A model equipped with 15 ft (4.6 m) cable; available with optional 25 ft (7.6 m) cable
27 A model equipped with 20 ft (6.1 m) cable;
40 A model equipped with 25 ft (7.6m) cable; available with optional 50 ft (15.2 m) cable
50 A model equipped with 25 ft (7.6 m) cable; available with optional 50 ft (15.2 m) cable
55 A model equipped with 25 ft (7.6 m) cable; available with optional 50 ft (15.2 m) cable
80 A model equipped with 25 ft (7.6 m) cable; available with optional 50 ft (15.2 m) cable
100 A model equipped with 25 ft (7.6 m) cable; available with optional 50 ft (15.2 m) cable
Use air or nitrogen plasma gas:
12 A model: 1 CFM (28.3 L/min) at 40 PSI (276 kPa);
25 A model: 4.5 CFM (129 L/min) at 60 PSI (414 kPa);
27 A model : 4.5 CFM (129 L/min) at 60 PSI (414 kPa);
40 A model: 6 CFM (170 L/min) at 75 PSI (517 kPa);
50 A model: 5.3 CFM (152 L/min) at 70 PSI (482 kPa);
55 A model: 6 CFM (172 L/min) at 70 PSI (482 kPa);
80 A (C, CM, CX, and CXM) model: 7.2 CFM (207 L/min) at 80 PSI (551 kPa)
80 A (T and TM) model: 7.8 CFM (221 L/min) at 70 PSI (482 kPa)
100 A model: 9.2 CFM (260 L/min) at 75 PSI (517 kPa)
Safety interlock devices shut down power source
12 A, 27 A, 40 A, 50 A, 55 A, 80 A and 100 A models have safety trigger guard
Gear rack pitch for 50 A, 55 A, 80 A and 100A machine-held models: 32
Cutting capacity for mild steel:
12 A model − up to 3/16 in (5 mm) at 12 A;
25 A model − up to 3/8 in (10 mm) at 25 A;
27 A model − up to 3/8 in (10 mm) at 27 A;
40 A model − up to 1/2 in (12.7 mm) at 40 A;
50 A model − up to 7/8 in (22 mm) at 50 A;
55 A model - up to 1 in (25.4 mm) at 55 A;
80 A model − up to 1-1/4 in (32 mm) at 80 A
100 A model − up to 1-1/2 in (38 mm) at 100 A
OM-1593
Use above FORM number when ordering extra manuals.
2007−08
176 877T
©
2007 MILLER Electric Mfg. Co.