ABB EVLunic V2 Manuale di installazione - Pagina 5

Sfoglia online o scarica il pdf Manuale di installazione per Apparecchiature industriali ABB EVLunic V2. ABB EVLunic V2 8. Pedestal – floor-mounted column

Stampa la pagina

Anchoring to the base

The enclosed dowels must be used for anchoring (6 x Hilti HKD-ER compact dowels M8x30).

Specifications for compact dowels Hilti HKD-ER M8x30. Source: Hilti

Making drillholes

►

Mark the 6 holes on the concrete foundation using the baseplate of the floor-mounted

column.

Make sure that the connection cable is located precisely underneath the opening in the

baseplate.

►

Drill the 6 mounting holes:

Diameter: 10 mm

Drill-hole depth: 33 mm

►

Hammer the enclosed dowels using the Hilti HSD-G manual setting tool (not included

in the scope of delivery) so that they are flush with the floor.

Hilti HSD-G manual setting tool. Source: Hilti

Please also observe the following instructions:

Instructions on inserting the dowels. Source: Hilti

Document: Rev. 1.00 / Document No.: 90333 │ Date 21.08.2018

Technical data

Anchorage ground

Recommended load

Per dowel

Required clearance

Torque Tinst

Drill-hole diameter do

Drill-hole depth h1

Standard concrete with a strength

class of C20/25-C50/60 or greater

Tension N (uncracked concrete)

Transversal shear V (uncracked con-

crete)

3,9 kN

10,5

≥8 Nm

10 mm

33 mm