Burkert 8644 AirLINE Manuale di avvio rapido - Pagina 14

Sfoglia online o scarica il pdf Manuale di avvio rapido per Sistemi di controllo Burkert 8644 AirLINE. Burkert 8644 AirLINE 17.

NOTE!

For the plug-in connections the hose pipes must meet the following

requirements:

• Minimum hardness of 40 Shore D (in accordance with DIN

53505 or ISO 868);

• Outer diameter in accordance with DIN 73378 (max. permitted

deviation ± 0.1 mm of the nominal dimension);

• Burr-free, cut off at right angles and undamaged on the outer

diameter;

The hose pipes must be pressed all the way into the plug-in

connections.

7.1.2. Removing the plug-in connections

→

To detach the pipes, press in the thrust ring and pull out the hose

pipe.

7.1.3. P neumatic connections –

AirlINE standard

Fig. 11: Pneumatic connections - valve discs

Inscription areas

Working connections

for 5/2-way valves

Working connections

for 3/2-way valves

english

Type 8644

Installation

Procedure:

→

Depending on the version, plug the connections in the corre-

sponding working connections or screw them in.

→

Connection nipples can be used for threaded versions.

Inscription of the connections:

→

Label the inscription areas with the data of the valve

connections.

7.1.4. P neumatic connections –

AirLINE Quick

Fig. 12: Pneumatic connections – AirLINE Quick

Procedure:

→

Depending on the version, plug the connections in the corre-

sponding working connections.