Chromalox 8003 Manuale d'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale d'uso per Regolatore di temperatura Chromalox 8003. Chromalox 8003 19. 1/8 din temperature controller

General Operation

There are two setup modes for the 8003:

• Configuration Mode

• Operator Mode

In general, the Configuration Mode is the initial setup of

the controller when first installed. Input type and alarm

setup are examples of Configuration Mode settings. The

Operator Mode includes settings that might be adjusted

frequently with daily control operations such as setpoints

and PID parameters.

Notes for Configuration Mode:

FUNC = Stores the new value of a selected parameter

and increments to the next parameter.

SMRT = Scrolls parameters back (in reverse order)

without storing the new parameter value.

▲ = Increases the value of the selected parameter.

▼ = Decreases the value of the selected parameter.

Configuration Procedure

1. Remove the instrument from its case.

2. Set the internal switch V2 (see the following

figure) in open position.

3. Reinsert the instrument in its case.

4. Switch on the instrument. "CNF" should be displayed

in the upper display.

Note: If "CAL" indication is immediately displayed,

press the ▲ pushbutton to return to the

configuration mode (CNF).

5. Push the FUNC pushbutton.

The lower display shows the parameter code while

the upper display shows the actual parameter value.

PZ1

PZ3

PZ4

PZ6

PZ7

PZ10

PZ11

Chromalox 8003 User's Manual