AQUAPHOR OSMO PRO 50 EU Manuale - Pagina 7
Sfoglia online o scarica il pdf Manuale per Sistemi di filtrazione dell'acqua AQUAPHOR OSMO PRO 50 EU. AQUAPHOR OSMO PRO 50 EU 16.
Stampa la pagina
lation diagram
13. Metal lock washer
14. Fixing nut
15. Union nut
16. Drain tube (black)
17. Drain clamp
18. Stand for the storage tank
19. Storage tank
20. Storage tank tap
21. Connection for storage tank
22. A tube of the storage tank (blue)
23. Connection node
24. Connecting tube of the
connection unit (red)
26
2
25
27
24
drain clamp fits most drain pipes with a diameter
of about 40 mm).
9. Remove the protective film from the gasket.
Bond the gasket to the inside of the clamp so
that the hole in the gasket matches the hole
in the clamp fitting.
10. Place the clamp on the pipe and then tighten
the bolts. The bolts should be tightened evenly
so that the two pieces of the clamp are parallel.
11. Drill a 7 mm hole through the clamp connec-
tion. Put a plastic nut on the free end of the
drain tube (16) and, inserting the tube into
the drain clamp by 20–30 mm, screw the nut
onto the fitting.
25. Inlet connection
26. Retaining clips
27. Sealing gasket
26
1
2
3
4
7
9
10
8
11
12
13
14
15
6
17
16
Installing the storage tank
12. Take the tank (19) out of the packaging and
place it on the support (18).
..........................................................................................
ATTENTION! Find a position where the tank
is stable.
..........................................................................................
13. Screw the tap (20) onto the fitting (21) located
in the upper part of the tank. If necessary,
seal the connection using seal tape.
..........................................................................................
ATTENTION! Do not drop the tank.
..........................................................................................
7