AQUAPHOR RO-206S Manuale operativo - Pagina 4

Sfoglia online o scarica il pdf Manuale operativo per Sistemi di filtrazione dell'acqua AQUAPHOR RO-206S. AQUAPHOR RO-206S 17. Reverse osmosis system

4. Design and Functions of RO-206S

Fig. 2

Main units of RO-206S:

1 – RO-206S housing assembly;

2 – Pre-treatment unit K1;

1. The RO-206S housing (1) consists of a top

plate, a cover, a stand, a storage tank and a

front panel. Four collectors (fot the removable

filter cartridges) and a hydraulic unit are fixed

in the top plate. The top plate is covered with a

decorative cover, equipped with a handle fixing

the cover in its central part. A pump is installed on

the lower part of the housing (stand) to increase

the water pressure in RO-206S.

RO-206S is equipped with a storage tank for

treated water to provide the desired water

quantity at any time.

ATTENTION! The RO-206S performance depends on the pressure in the water supply sys-

tem. No proper operation of RO-206S is guaranteed at pressures below 90 kPa in the water

supply system.

3 – Pre-treatment unit K2;

4 – Reverse-osmosis membrane unit.

At the front, the RO-206S housing is covered

with a decorative panel where an electronics

unit and control elements are located.

2. K1 and K2 replaceable filter cartridges are part of

the water pre-treatment unit (2, 3). The water pre-

treatment unit is designed to remove impurities from

the water such as iron hydroxide and active chlorine

that can damage the reverse osmosis membrane.

3. The reverse osmosis membrane unit (4) includes

two replaceable membrane cartridges. The reverse

osmosis membrane unit removes organic, inorganic

compounds and salts from water as well as softens it.