BURL B80 Mothership Manuale di avvio rapido - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio rapido per Convertitore multimediale BURL B80 Mothership. BURL B80 Mothership 7. Mothership
Anche per BURL B80 Mothership: Manuale di avvio rapido (9 pagine), Manuale di avvio rapido (13 pagine)
Stampa la pagina1. GETTING STARTED
1.1 Register
Please register all serial numbers for your B80 MOTHERSHIP chassis, all Daughter Cards,
and BP-300.
You must register to activate your warranty! Please visit: www.burlaudio.com/register.
1.2 Check Jumper Settings On BMB1
The B80 MOTHERSHIP is fully modular, accommodating a wide variety of I/O needs. Jumper
settings on the BMB1 Motherboard allow for different I/O routing possibilities.
1.
Find H6 on the BMB1 Motherboard, as shown in Image 1 below.
2.
Use Examples A through D (on pages 2 and 3) to determine which setting to use based
on your configuration.
3.
See Channel Mapping for Jumper Settings charts on page 4.
4.
Jumper positions 1 and 2 determine INPUT mapping. 4 channels per slot: slot one is for
channels 1-4, slot 2 is 5-8, etc.
(Configurations possible: 4 Ch. per slot / 8 Ch. per slot / 8 and 4 Ch. per slot)
5.
Jumper positions 3 and 4 determine OUTPUT mapping.
(Output can start in slots 3, 5 & 7)
6.
Jumper positions 5, 6 and 7 have no function.
(Jumpers can be stored here for safekeeping when not in use)
7.
Jumper 8 is for use with the B16 MOTHERSHIP chassis, and should not be used with
the B80 MOTHERSHIP chassis.
Image 1: Locate the H6 Header on BMB1 Motherboard. From
the rear of the chassis, BMB1 is on the far left. The H6 Header
is highlighted. In this example, jumpers are on 6 and 7.
B80-BMB1
1