BURL B16-BMB3 MOTHERSHIP Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Telaio BURL B16-BMB3 MOTHERSHIP. BURL B16-BMB3 MOTHERSHIP 13. Bmb3 rev c rom 1

1. GETTING STARTED

1.1 Register

Please register all serial numbers for your B80 MOTHERSHIP chassis, all Daughter Cards,

and BP-300.

You must register to activate your warranty! Please visit: www.burlaudio.com/register.

1.2 Remove Lid

Remove 9 screws on top and 2 on each side (Image 1).

Push lid up to remove from empty card slot (Image 2).

Image 1: Top view shows location of 4

screws on side before removing the lid.

1.3 Check Jumper Settings On BMB3

Find H8 on the BMB3 Motherboard, as shown in Image 3.

Make sure jumpers are set on Jumpers 1 and 8.

Jumper positions 1 determines input mapping (BAD4, BAD8).

Jumper positions 2, 3, 4, 5, 6 and 7 are NULL, default for B16.

Jumper position 8 determines use for B16 or B80 chassis.

CHAPTER 1

Image 2: Push lid up.

Image 3: Locate the H6 Header on

BMB3 Motherboard. From the rear of the

chassis, BMB3 is on the left.

The H8 Header is highlighted.

For B16, make sure jumpers are set on 1

and 8.