Aquaport AQP-UBC Manuale di installazione e istruzioni per l'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale di installazione e istruzioni per l'uso per Refrigeratore Aquaport AQP-UBC. Aquaport AQP-UBC 12.

D. Tubing Installation

The Undersink Water Chiller has been supplied with quick and easy

to install quick connections.

To install tubing, push tubing into connections, and give a slight

pull to ensure tubing is secure.

Note: Check the end of the tubing to make sure there are no cuts,

nicks, flat spots or sharp edges. If any of these are present, cut

the end with scissors or utility knife.

1. Measure 3/4" (19.05mm) from the end of the tubing provided

and mark with a pencil. Fig 1.

2. Push the 1/4" tubing firmly into each fitting as per step 5 on

page 4 until the pencil mark is pushed next to the collet or until

tubing is fully seated. Fig 1. If tubing is removed, re-cut the

end, measure, mark and re-insert.

Note: To remove tubing, push collet against the face of fitting and

remove the hose (with collet still held against fitting face) Fig 2.

Tubing must be fully inserted/seated to avoid leaks.

Repeat for all other connections.

3. Pull slightly on tubing to ensure tube is secure.

Fig 1

3/4"

Correct Cut

19mm

Do Not Remove

Incorrect Cut

Fig 2

White Collet

3/4"

Insert 1/4"

Tube to Line

19mm

Push

Push Collet

Collet

Pull

Pull Tubing

Tubing

INSTALLATION AND OPERATING INSTRUCTIONS 5