Diamond RVE/3C-SBC Manuale - Pagina 8

Sfoglia online o scarica il pdf Manuale per Attrezzature per alimenti commerciali Diamond RVE/3C-SBC. Diamond RVE/3C-SBC 10.

WARNING: These operations can only be done by an authorised technician

CHANGING DE MOTOR REDUCER

a) remove the Disconnect the oven from the mains. Remove the cover of the transmission on the left side of

the oven by loosening the screws fastening it.

b) Loosen the screws (4) Fig. 10 to remove the chain that joins the pinion (3) and the axle of the first spit.

c) Once the chain has been removed, totally remove the screws (4) to take out the motor support (5) along with

the motor reducer.

d) Loosen the screw fastening the pinion (3) to the axle of the motor reducer to remove it from the axle. Totally

screws (2) to dismount the motor reducer from the support.

e) Change the motor reducer and proceed in reverse order to what is explained above to assemble it.

WARNING

When correctly tautened the motor chain should have a flexion in the centre of about 1 cm.

An excessively taut chain produces unnecessary work stress on the motor reducer.

CHANGING DE ELEMENTS

a) Disconnect the oven from the mains. ENSURE that the oven is unplugged before proceeding

b) Pull the controls (4) (see Fig. 12) out of the switches. Remove the control panel by completely removing the

screws that hold it in place. Remove the screws from the back panel and pull it to the left to remove it

c) Remove the cables from the item to be replaced.

d) Remove the glass (3) unscrewing the nuts (5) from the front.

e) Remove the nuts (1) from the element (2) and remove it from its compartment.

f) Change the element and proceed in reverse order as explained above to assemble it.

CHECK the connections have been made correctly before connecting the oven to the network.

CHAPTER 6

ASSEMBLY OF SPARE PARTS

2 3 4