Diamond TMS10S Manuale di servizio - Pagina 5

Sfoglia online o scarica il pdf Manuale di servizio per Attrezzature per alimenti commerciali Diamond TMS10S. Diamond TMS10S 6.

WHITE LEDS

E5. Disconnect the broken LED

strips from the power supply

F. RGB RECEPTOR REPLACEMENT

INFRARED RECEPTOR

F1. Unscrew the screws holding the

receptor to the tank

RADIO RECEPTOR

G. THERMOREGULATOR REPLACEMENT

G1. Extract the metal

cover unfastening the lateral

spring (use a small flat

screwdriver)

E6. Extract the broken LED strips

from the guide, operating with

a screwdriver

(OPERATIONS ON POINT A ARE TO BE ACCOMPLISHED FIRST)

F2. Disconnect the power supply,

the leds connector and extract

the infrared receiver from

the specific hole

F4. Disconnect the power supply

wires and the leds connector

G2. Unscrew , extract the

thermoregulator and

disconnect the cables

E7. Insert the new LED strips in the

aluminium profiles and extract

the 4 cables from the holes in

the basin

F3. Reposition the new receptor

and connect the power supply

and the LEDS

F5. Reposition the new receptor

and reconnect

G3. Connect the cables to the new

thermoregulator in the same

positions or refer to wiring table

ENGLISH

E8. Reconnect to the power supply

matching the polarity

G4. Install the new thermoregulator

and apply the cover lid fixing

one spring at a time