Diamond PV400X-R6 Manuale di istruzioni - Pagina 4

Sfoglia online o scarica il pdf Manuale di istruzioni per Frigorifero Diamond PV400X-R6. Diamond PV400X-R6 10.

INSTALLATION

The cabinet must not be tilted. If necessary, some models may be tilted to the side indicated on the

packaging. If not, it cannot be tilted. You must wait for at least 2 hours from standing the cabinet

up before starting it up.

Remove the packaging except the support pallet. A forklift truck or pallet truck can be used to move

it to its installation site, lifting the refrigerated cabinet making sure that it is not unbalanced.

The cabinet must not be dragged over the floor.

The area where the cabinet is positioned must be clear and clean, preventing the refrigerator

equipment's fan from absorbing materials that are subsequently then deposited on the condenser's

ribbing, reducing system efficiency.

Remove the pallet, taking care not to knock the unit. The cabinet can now be levelled, screwing in

or unscrewing the legs. When it is levelled, the protection film can be removed from the stainless

steel using a blunt object, and not a cutter as it could scratch the steel.

(according to models)

There must be a gap of 50 mm at the back and 30 mm at the sides of the cabinet when it has been

permanently installed.