Aquasana OptimH2O AQ-RO-BASE Manuale d'uso - Pagina 2

Sfoglia online o scarica il pdf Manuale d'uso per Sistema idrico Aquasana OptimH2O AQ-RO-BASE. Aquasana OptimH2O AQ-RO-BASE 9. Drinking water system reverse osmosis filtration technology

Stampa la pagina

REQUIRED TOOLS & MATERIALS

• Basic plumbing knowledge

• 1/ 8 " & 7/ 3 2" Drill Bits/Drill

• Tape Measure

• Adjustable Wrench

• Utility Knife

• Bleach

• Screwdriver (Phillips)

• Safety Glasses

WHAT'S INCLUDED

A System Manifold

I Eye Dropper

B Carbon Filter Sump

J Plumber's Tape

C Membrane Filter Sump

K Drain Connector

D Carbon Filter Sump

L Nuts & Bolts

E RO Faucet Spout

M Foam Seal

F RO Faucet Body

N O-Ring+Faucet Base

G Water Storage Tank

O Toggle Bolts

H Tank Connector

P Flow Restrictor

• Pencil

• Masking Tape

• Pan or Bucket

Q 90° Elbow

R Mounting Screws

S Brass Tee

T Tubing 3/ 8 " Red

U Tubing 3/ 8 " White

V Tubing 1/4" White

W Carbon Filter Cartridge

X Carbon Filter Cartridge

WARNING: Using a qualified installer is recommended.

Proper installation is the responsibility of the installer.

Product failure due to improper installation is not covered under the warranty.

PLAN FOR INSTALLATION

Prior to installation, we recommend you read the entire manual to familiarize yourself with the

system, and help you determine the best location for installation. Please check and comply with

all local plumbing codes.

PREPARE SITE FOR INSTALLATION

NOTE: If you have metal drain pipes, consult a plumber for installation of drain connection.

1. Prior to installation, close the cold water shut-off valve.

2. Temporarily place system manifold and tank

into the under sink cabinet or desired location

to ensure adequate space and proper positioning.

3. 3/ 8 " white tubing will be used to connect manifold to tank, and from faucet stem to manifold.

Measure out 3/ 8 " white tubing from the top of the tank to the outlet side of the system

manifold and mark 3/ 8 " tubing. Then measure remaining length of 3/ 8 " tubing from the

manifold to the desired location of the faucet hole to ensure there will be enough 3/ 8 " tubing

available for both connections. Wait to cut tubing and follow instructions below.

4. Remove system and tank from under your sink to begin installation.

INSTALLATION OVERVIEW

Step 1 - Install Brass Tee Fitting

Step 2 - Install RO System Manifold

Step 3 - Install Water Storage Tank

Step 4 - Install RO Faucet

HOT

NOTE: Keep these instructions for future reference

Step 5 - Install RO Drain Connector

Step 6 - Connect Tubing

Step 7 - Stage 1–3 Filter Installation

Step 8 - Sanitize, Pressure Test, Purge System

COLD

OptimH2O™

Stage

RO Membrane

OptimH2O™

AQ-RO3-RO

OptimH2O™