Panasonic AG-DVC200P Manuale di istruzioni per l'uso - Pagina 7

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Videocamera Panasonic AG-DVC200P. Panasonic AG-DVC200P 44. Digital video camera recorder
Anche per Panasonic AG-DVC200P: Manuale di istruzioni per l'uso (45 pagine)

Stampa la pagina

Parts and their functions

BREAKER switch

If an excessively high current flows inside the unit due to some

problem or other, the circuit breaker is tripped and the power is

automatically turned off to protect the unit.

Push this button in after conducting an inspection or repairs

inside the unit. If there are no problems, the power will come

back on.

MONITOR (volume) control

This is used to adjust the volume of the monitor speaker or

earphone.

AUDIO LEVEL CH1, CH2 (audio channel 1,

2 recording level) controls

These are used to adjust the CH1 and CH2 recording levels

while monitoring the level meter inside the viewfinder.

POWER/WARNING lamp

This lamp lights up green when the power is turned on, and it

flashes in green during interval recording. When a warning is

given, it lights up red or flashes in red to alert the user. For

further details, refer to "Warning system" (page 38).

SPEAKER

The sound can be monitored through this speaker.

When an earphone is connected to the PHONE jack, the sound

of the speaker will be automatically cut off.

What can be monitored is the mixed sound of CH1 and CH2.

;

SCENE FILE dial

This enables the camera settings that match the shooting

conditions to be selected. For further details, refer to "How to

use file select" (page 24).

MODE CHECK button

This enables the setting modes of the camera's control switches

to be checked in the viewfinder.

QUICK FOCUS button

This supports the focusing of the subject. When it is pressed,

the lens iris is opened for about 10 seconds. It makes the depth

of field shallower and facilitates focusing.

AUTO IRIS MODE selector switch

This is used to select the position that matches the shooting

conditions when shooting by automatically adjusting the lens

iris.

BACK.L : When making a back-lit subject brighter for shooting

STD

: For normal shooting

SPOT.L : For shooting a spot-lit subject

FULL AUTO button

This is pressed when there is no time to check the camera unit's

settings. The lens iris and white balance will be automatically

adjusted.

FULL AUTO lamp

This lights up when FULL AUTO shooting is being performed.

JOG dial button

This is used to select the menu items and perform settings when

the MENU button B is at the ON position. When the synchro

scanning mode has been selected for the shutter speed, the

shutter speed can be easily adjusted more finely.

MENU button

This is used to switch the menu ON and OFF.

RESET button

This is used to reset the numerical value of the counter or time

code.

<Note>

This value is reset immediately when the COUNTER has been

selected. When TC or UB has been selected, the reset button

works only when the TCG selector switch is at the SET position.

COUNTER selector switch

This is used to switch the counter display.

COUNTER: A relative numerical value is displayed by the

counter.

includes discontinuous parts, the counter reading

may also lack continuity.

: The time code is displayed.

: The user's bit is displayed.

TCG selector switch

This sets the time code operation mode to FREE RUN, REC

RUN or SET. For further details, refer to "Setting the time data"

(page 22).

AUDIO SELECT CH1, CH2 (audio channel 1,

2 auto/manual level adjustment selector)

switches

These are used to select the method used to adjust the audio

levels of audio channels 1 and 2.

AUTO : The audio level is adjusted automatically.

MAN : The audio level is adjusted manually.

AUDIO IN (audio input selector) switches

These are used to select the input signals to be recorded on

CH1 and CH2.

FRONT: The input signals from the microphone connected to

(MIC)

the MIC IN connector are recorded.

REAR : The input signals from the microphone connected to

(MIC)

the AUDIO IN CH1/CH2 connector are recorded.

REAR : The input signals from the line connected to the

(LINE)

AUDIO IN CH1/CH2 connector are recorded.

Mic power switches

These are used to turn the phantom power (+48V) for each rear

jack channel ON and OFF.

<Note>

ON or OFF can be set for supplying the phantom power of the

front microphone using "FRONT MIC POWER" on the

<MIC/AUDIO> sub-menu screen.

Backup battery compartment

For further details on replacing the backup battery, refer to

"Replacing the backup battery" (page 40).

However, when the tape recording