Panasonic AGDVC30 - 3 CCD DV CAMCORDER Menu informazioni - Pagina 12

Sfoglia online o scarica il pdf Menu informazioni per Videocamera Panasonic AGDVC30 - 3 CCD DV CAMCORDER. Panasonic AGDVC30 - 3 CCD DV CAMCORDER 15. Mini-dv camera-recorder (ntsc)
Anche per Panasonic AGDVC30 - 3 CCD DV CAMCORDER: Specifiche tecniche (8 pagine), Manuale d'uso (21 pagine), Opuscolo e specifiche (10 pagine)

Stampa la pagina
Menu configuration

AV IN/OUT SETUP screen

Item/
(Display
Description of settings
mode)
A. DUB INPUT
Use this to select the sound to be recorded
(VCR)
when performing audio dubbing.
MIC:
The sound of the internal microphone or
external microphone is recorded. (P58)
A_IN:
The sound of the audio unit connected to
the AV IN/OUT jack is recorded.
<Note>
If audio dubbing is performed on a
recording which was made in the 48K (16-
bit) audio mode, the sound heard during
shooting will be overwritten and the dubbed
sound recorded in its place.
DV OUT
Select the ON setting when converting
(VCR)
analog input signals into digital signals and
outputting them from the DV connector.
OFF, ON
The underlining indicates the factory setting.
78
(cont.)
ZEBRA
DETECT
(CAMERA)
VIDEO OUT
OSD
(CAMERA)
(VCR)
DATE/TIME
(CAMERA)
(VCR)
LEVEL METER
(CAMERA)
(VCR)
DISPLAY
(CAMERA)
(VCR)
CAMERA
DATA
(VCR)
LCD
BACKLIGHT
(CAMERA)
(VCR)

DISPLAY SETUP screen

Item/
(Display
Description of settings
mode)
Use this to set the brightness level at which
the zebra patterns are to be displayed.
80%, 85%, 90%, 95%, 100%, 105%
Select the ON setting to output the
information displayed on the screen
together with the signals from the AV
IN/OUT jack.
ON, OFF
Use this to set whether to display the date
and/or time on the screen and on the
signals that are output from the AV IN/OUT
jack.
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
The date and time are displayed.
O If any setting other than OFF is selected,
the time and/or date are displayed for
the signals that are output from the AV
IN/OUT jack, regardless of the setting
selected for the VIDEO OUT OSD item.
Select ON to display the audio level meter
on the screen.
OFF, ON
Use this to set the amount of information to
be displayed on the screen. (P67)
OFF, PARTIAL, ALL
With the ON setting, the camera settings
(vibration reduction, F-number, gain value
and white balance information) at the time
of shooting are displayed when the tape is
played back.
OFF, ON
<Note>
When a tape on which the unit's camera
settings has been recorded is played back
on another unit, the camera settings may
not be displayed properly.
Use this to adjust the backlight of the LCD
monitor.
When HI is selected, the backlight is made
brighter than usual.
HI, NORMAL