Panasonic Color Television Manuale di istruzioni per l'uso - Pagina 9

Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per TV Panasonic Color Television. Panasonic Color Television 36. Color television

Stampa la pagina
TVNideo Button -
Press the TVNIDEO button
to select desired input.
Multi Button
The MULTI button can be programmed to operate up
to 6 Remote function buttons at the same time.
For Example: TV
Power/On,
VCR Power/On
(selected
brands) can be operated at the same
time with
one press
of
the
MULTI
button.
Procedure
1.
First program the Remote for the selected VCR
Infra-red access
code.
Confirm that the Remote
Control is compatible
with
the equipment.
2. Face the Remote Control transmitter away from all
equipment remote sensors.
3.
Press the Remote TV POWER button and the
MULTI
button
simultaneously.
(All
previous
commands are
erased.)
VIDEO 2
VIDEO 1
CH 02
Signal connected to:
REAR VIDEO
/AUDIO
INPUT
2
JACKS
REAR VIDEO
/AUDIO
INPUT 1 JACKS
TV or CABLE
----<~
R-Tune (Rapid Tune) Button -
Press the
R-TUNE (RAPID TUNE) button to instantly switch
between the last two channels selected (without any On
Screen display being activated).
Recall Button -
Press the RECALL button to
review:
• Audio Mode status
• CH number or Video Input selected
• Sleep Timer status
• Clock time
• Channel Caption (Station Identifier)
NOTE:
You can also program the MULTI button to perform
most individual Remote Control button functions.
Buttons which continuously perform a function as
long as pressed (Volume Up/Down, Channel
Up/Down, etc.) cannot be programmed. Only those
buttons which perform a function when initially
pressed (Power
On/Off,
Mute, Direct Channel
Entry,
etc.) can be programmed.
To delete entered functions - Press the Remote
TV POWER and MULTI buttons simultaneously.
Now you can enter from one to six different Remote
functions.
(TV)
P~R
cg
PRESS SIMULTANEOUSLY
(TV)
P~R
cs
PRESS SIMULTANEOUSLY
4.
Press a maximum of 6 Function buttons on the
Remote.
Each button you press is equal to one function. If six
remote button functions are
entered,
all will register
in the MULTI button memory in the sequence
entered. When less than
six
remote button
functions
are
entered,
press the MULTI button to end the
program mode.
(Waiting
more than 30 seconds
without
pressing
another button will also end the
program mode.)
The following is an example of Remote functions
that can be programmed into the MULTI button.
TV Power -
For turning
TV ON and OFF.
VCR Power - For
turning
VCR ON and OFF
(selected brands
after
programming it's Infra-red
access
code,
if
necessary).
Both can be turned ON
or
OFF with one press of the
MULTI button.
(TV)
VCR
J"-
~R_
JJ
1:00
rVIDE01'
l
.J
CH03
XYYZ
29
STEREO
SAP
MONO
CHANNEL TUNED
IMMEDIATELY BEFORE
R-TUNE
CO
Press Button
Press Button Again
•
~ r~
... _
. . ,,'\. _
RECALL
t1
CHANNEL NOW
BEING VIEWED
-9-