Panasonic CT-27D10 Manuale di istruzioni per l'uso - Pagina 5
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per TV Panasonic CT-27D10. Panasonic CT-27D10 21. Crt tvs
Anche per Panasonic CT-27D10: Manuale di istruzioni per l'uso (37 pagine)
![Panasonic CT-27D10 Manuale di istruzioni per l'uso](/uploads/products/server2/3760977/3760977.png)
INSTALLATION
Installation
Television
Location
This
unit
is intended
to be used
with an optional
stand
or entertainment
center.
Consult
your dealer for available
options,
£3
Avoid excessive
sunlight or bright lights, including reflections.
£3
Keep away from excessive
heat or moisture.
Inadequate
ventilation
may cause internal
component failure.
£3
Fluorescent
lighting may reduce remote control transmitting
range.
£3
Keep away from magnetic equipment,
including motors, fans and external speakers.
Optional
Cable Connections
Shielded
audio
and
video
cables
should
be used
between
components.
For
best
results:
Use 75-ohm coaxial shielded cables.
C3
Use appropriate
input and output connectors,
that match your component
connectors.
C3 Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION:
TO PREVENT
ELECTRIC
SHOCK MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET
AND FULLY INSERT.
DO NOT USE A PLUG WITH A
RECEPTACLE
OR OTHER
OUTLET
UNLESS
THE
BLADE
CAN
BE
FULLY
INSERTED
TO PREVENT
BLADE EXPOSURE.
FOR SOME MODELS THAT ARE
NON-POLARIZED,
THE USE OF AN AC ADAPTOR CONNECTOR
MAY
BE NECESSARY.
Polarized plug
Non-Polarized plug
Cable / Antenna Connection
For proper
reception,
either
a cable
or antenna
connection
is required.
Cable Connection
Incoming Cable from
Connect
the cable
supplied by your
local cable
company.
Note:
A cable converter
box may be required
for proper reception.
Check
with
your
local
cable
company
for
compatibility
requirements,
Antenna
Connections
t-i
For proper reception of VHF/UHF
channels, an external antenna is
required. For best reception an outdoor antenna is recommended.
£3
Antenna Mode must be set to FV.
i---_/-
Cable
Preset
Cable Mode is preset at the factory, Antenna
users must change to Antenna Mode in the
Setup Menu.
Cable Company
75 Ohm VHF/UHF
on back of TV
Incoming Cable from
Home Antenna
III