AquaStar StarzTruck Manuale di installazione - Pagina 6

Sfoglia online o scarica il pdf Manuale di installazione per Aspiratore per piscina AquaStar StarzTruck. AquaStar StarzTruck 20. Automatic suction pool cleaner

Stampa la pagina

step 3: adjustinG Your starztruck automatic pool cleaner

Observe your StarzTruck automatic pool cleaner in operation at higher speed with dual or variable speed

pumps. Adjust the regulator, three-way or ball valves to speed up or slow down the cleaner (see Fig. 7). When

the StarzTruck automatic pool cleaner seems to be spending too much time against steps, vertical walls and

other obstructions, turn the rear flap tension adjuster to position I (see Fig. 8). The rear flap adjuster is preset

to II. Sometimes adjusting your flow valve up or down will help. Nevertheless, custom pools with interior bar

stools, fountains, planters, etc., will require someone to physically free the cleaner from its entrapment.

The StarzTruck automatic pool cleaner will climb vertical walls in concrete and fiberglass pools (not vinyl) if

there is at least a 12-inch radius where the floor meets the walls. Because of the internal programmed gear

box, the cleaner will not climb the wall every time. Likewise, it will not always go all the way up the wall.

If the StarzTruck automatic pool cleaner is not sticking to the wall, set the rear flap to position III (see Fig. 8)

and/or adjust your regulator valve(s). If the cleaner climbs above the waterline and sucks air, set the rear flap

to position I (see Fig. 8) and/or adjust your regulator valve(s).

Screw top in.

Bypass less water.

Speed cleaner up.

Max

Fig. 7

Rear flap tension adjuster

Fig. 8

Unscrew top.

Bypass more water.

Min

Slow cleaner down.

Max