3Built RES12VX Manuale - Pagina 3
Sfoglia online o scarica il pdf Manuale per Ricevitore 3Built RES12VX. 3Built RES12VX 5.
Stampa la pagina
PROGRAMMING
1) Disconnect power to the Receiver.
2) Have the new Transmitter (with battery) ready. (test by pushing a button and the red
LED should turn on.
3) Apply power to the Receiver and continue to the next step within 10 seconds.
4) Push the bottom button on the receiver for 3 seconds.
5) Listen for a long beep from the receiver indicating that the transmitter's code has been
saved.
6) Disconnect the power to the Receiver for a few seconds.
7) Connect power to the Receiver and test new Transmitter by pushing the Lock and then
the Unlock buttons.
ERASE RECEIVER
1) The Receiver's memory can be entirely erased of all transmitter codes.
2) Disconnect power to the Receiver for a few seconds and reconnect.
3) Press the Erase button on the transmitter for 5 seconds.
4) Release the button when you hear 8 short beeps from the Receiver indicating that all
codes have been erased.
©2016 3Built LLC
Page 3 of 5
6/28/16