Diamond Guitar Pedals Memory Lane 2 Manuale d'uso - Pagina 3

Sfoglia online o scarica il pdf Manuale d'uso per Pedale musicale Diamond Guitar Pedals Memory Lane 2. Diamond Guitar Pedals Memory Lane 2 8. Analog delay with tap tempo and dual independent delay times

Stampa la pagina

Design Features

• 550 ms approx analog delay time using 2 NOS MN3005's running at 15V

• two independent, footswitchable delay times (DLY1/DLY2)

• tap tempo footswitch control of analog delay time

• footswitchable modulation with depth and speed controls

• switchable dotted 8th note mode for rhythmic delay effects

• tilt EQ in provides control over frequency spectrum of repeats (from increasingly dark repeats to flat to

increasingly bright repeats)

• 'kill-dry' delay only output for amplifiers with parallel effect loops

• inserting cable into delay only output jack automatically removes delay signal from mix output giving

separate direct only and delay only outputs

• true bypass operation for mix/direct output

• pristine signal paths using premium opamps, polypropylene caps and metal film resistors

• expression pedal input to control feedback level

• expression pedal input to control delay time (Delay1)

• ability to use standard 1/4" stereo to two 1/4" mono insert cable in expression pedal input to insert an

effect or chain of effects into the feedback loop (can also be used to insert a standard volume pedal as

feedback control)

• LED flashes provide visual feedback of delay time (Delay1 & Delay2)

• self-oscillating feedback path with ability to shape via feedback EQ in realtime with user selectable

sensitivity

• internally regulated 15V operation for lower noise and increased headroom

• rugged genuine Hammond aluminum diecast enclosure

• DC power supply included

Operation

Using the Provided 18-24V Power Supply

The Memory Lane 2 ships with an 18 or 24VDC wallmount adapter with standard P5/9.5mm plug with

positive center pin. The Memory Lane 2 internally regulates this to 5, 12 and 15V for different portions of

the circuit, so any 18 to 24 VDC supply with 200 mA or more available current will work. There is no

sound difference between using 18V or 24V as the voltage is internally regulated to 15V. Note that power

supplies providing less than 18V will not adequately power the Memory Lane 2.

It is important to highlight that the Memory Lane 2 requires a positive center pin – most commercial

pedalboard power supplies that have 18V available are negative center pin. An inexpensive cable to power

the Memory Lane 2 from most popular pedal power supplies is available from www.diamondpedals.com.

It is also important to note that the standard P5 plug that the Memory Lane 2 powr supply uses will also fit

into the DC jack on most 9V powered effects. PLEASE DO NOT PLUG THE MEMORY LANE 2

POWER SUPPLY INTO ANY OTHER EFFECTS, AS IT MAY CAUSE PERMANENT DAMAGE TO

THEM. Diamond Pedals will not be held responsible for damage to pedals as a result of using an

improper power supply with the Memory Lane or any other pedal.

Memory Lane 2 user manual v1.00