Panasonic AW-HEA10WEJ Manuale di istruzioni per l'uso - Pagina 26
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per Fotocamera digitale Panasonic AW-HEA10WEJ. Panasonic AW-HEA10WEJ 34. Control assist cameras
Anche per Panasonic AW-HEA10WEJ: Manuale di installazione e istruzioni per l'uso (40 pagine)
Stampa la pagina
Using preset memory
Register the setting conditions you like to preset memory, and load
registered settings. (Up to 9 presets)
Preset memory can be registered and loaded from both the live screen
[Live] and the Web setup screen.
The following settings are registered.
• Zoom level
• Exposure
• PinP display/non-display
• PinP retrieval position
• PinP display zoom level
• PinP display position
• Pan/tilt positions
• White balance
• Control mode
• Digital zoom enabled/disabled
• Auto mode/manual mode for adjusting brightness
• Brightness adjustment value
Registering settings to preset memory
The following procedure is an example of performing the operation in the
live screen [Live].
1.
Open the live screen (→ page 16), or open the [Preset
position] screen as described below.
1) Open the Web setup screen [Setup] (→ page 16).
2) Click the [Image] button to open the [Image] screen (→ page 19).
3) C lick the [Image] tab and then click the [Setup>>] button of [Preset
position] to open the [Preset position] screen.
2.
Select any of [1] to [9] from the pull-down menu of
[Preset].
3.
Click [Set].
• The current setting conditions are registered to the preset memory.
(If there are setting conditions already registered for the selected
number, they are overwritten.)
Accessing preset memory
The following procedure is an example of performing the operation in the
live screen [Live].
1.
Open the live screen (→ page 16), or open the [Preset
position] screen as described below.
1) Open the Web setup screen [Setup] (→ page 16).
2) Click the [Image] button to open the [Image] screen (→ page 19).
3) C lick the [Image] tab and then click the [Setup>>] button of [Preset
position] to open the [Preset position] screen.
2.
Select any of [1] to [9] from the pull-down menu of
[Preset].
3.
Click [Move].
• If [Home] is selected and then [Move] is clicked when the control
mode is the main screen, the zoom level becomes 1x.
• If [Home] is selected and then [Move] is clicked when the control
mode is PinP, the PinP retrieval position becomes the center of the
screen and the zoom level for PinP display becomes 1x.
26