Panasonic BB-HCM580A Manuale operativo

Sfoglia online o scarica il pdf Manuale operativo per Fotocamera digitale Panasonic BB-HCM580A. Panasonic BB-HCM580A 4. Power over ethernet (poe) zoom mpeg-4 network camera
Anche per Panasonic BB-HCM580A: Nota di integrazione (10 pagine)

Stampa la pagina

Installation Guide

Network Camera

BB-HCM580A

Model No.

BB-HCM581A

This manual is written for both the BB-HCM580A (AC Adaptor Type) and the BB-HCM581A (PoE Ready). Available features and operations vary slightly

depending on the model. You can confirm the model no. of your camera by checking the model no. printed on the front of the camera.

Please read the included Important Information before proceeding.

Complete Operating Instructions and all other documentation can be found on the included CD-ROM.

• This document (Installation Guide) explains how to physically connect the

camera to the power supply and network, as well how to mount or place the

camera for regular use.

• The Setup Guide describes how to set up the camera so that it can be

accessed using a PC.

Abbreviations

• UPnP is the abbreviation for "Universal Plug and Play".

• The Network Camera is referred to as "the camera" in this document.

Installation Procedure Overview

The following is an overview of the steps required to install and setup the camera. All steps are explained in this document unless otherwise noted.

Preparation

Camera Diagram

Confirm that you have all the

Make sure you know the

items required for

names of the camera's

installation.

physical features.

Preparation

Confirm the following items are included in the camera's packaging.

• Additional pieces can be ordered by calling 1-800-332-5368.

Main Unit (1 pc.)

Screw A (2 pcs.)

Order No. XYN3+J6FJ

Used to secure ceiling plate A to

ceiling plate B.

Ceiling Mounting Cover (1 pc.)

Order No. PSKL1023Y2

Used when mounting the camera

on a ceiling.

AC Adaptor (1 pc.)

[BB-HCM580A Only]

Order No. PQLV202U

Cord Length: About 3 m

(9 feet 10 inches)

Safety Wire (1 pc.)

Order No. PQME10080Z

Used to secure the camera when

mounting it.

You will need the following additional items to install and configure the camera.

– a PC (see the system requirements in the Important Information document)

– a router

Option for BB-HCM581A

You can also connect the camera using the optional Panasonic BB-HCA3A AC Adaptor. The BB-HCA3A includes the following items.

AC Adaptor (1 pc.)

Cord Length: About 3 m (9 feet 10 inches)

PQQX15933YA KK0207CM1107

Indoor Use Only

(AC Adaptor Type)

(PoE Ready)

Connections

Connecting the camera to

your network and to the power

outlet.

Please read this document before using the product, and save this document for future

reference. Panasonic Network Camera Website: http://www.panasonic.com/netcam

for customers in the USA and Puerto Rico

• Refer to the Operating Instructions on the CD-ROM for details regarding

the camera's features.

• Refer to the Troubleshooting Guide on the CD-ROM if you have any

problems configuring or using the camera.

• The Setup CD-ROM is referred to as "the CD-ROM" in this document.

Setup

Setting up the camera (described in the included

Setup Guide). This involves configuring the camera

so that it can be accessed from a PC.

Washer S (1 pc.)

Order No. XWG26D12VW

Used when securing the safety

wire to the camera.

Screw B (5 pcs.)

Order No. XTB4+20AFJ

Used to secure ceiling plate B (4

pcs.) and the safety wire (1 pc.) to

the ceiling.

Ceiling Plate A (1 pc.)

Order No. PQZMHCM581A

Used to secure the camera to

ceiling plate B.

AC Cord (1 pc.)

[BB-HCM580A Only]

Order No. PSJA1069Z

Cord Length: About 1.8 m

(5 feet 11 inches)

Important Information (1 pc.)

Installation Guide

(this document) (1 pc.)

Setup Guide (1 pc.)

– a LAN cable (CAT-5 straight cable)

AC Cord (1 pc.)

Cord Length: About 1.8 m (5 feet 11 inches)

Mounting

Mounting or placing the

camera.

Washer L (1 pc.)

Order No. XWG4F16VW

Used when securing the safety

wire to the ceiling.

Screw C (1 pc.)

Order No. PQHV2610PJ65

Used for connecting the safety

wire to the camera.

Ceiling Plate B (1 pc.)

Order No. PQMD10110Z

Used to secure the camera to the

ceiling.

Audio/Video Cord (1 pc.)

[BB-HCM581A Only]

Order No. PSJA1103Y

Setup CD-ROM (1 pc.)

Order No. PQQX15704XCD

Contains the Setup Program needed to

configure the camera, as well as the

camera's documentation.*

*See the included Important Information

for a description of each document.